Class A Pre-Trip Inspection Checklist (2026): Every Item in Order
Class A CDL pre-trip inspection checklist in order 2026: cab checks, walkaround items, coupling system, trailer, and the phrases to say to the examiner.
The Class A pre-trip inspection is the same walkaround as every CDL class, plus one extra section: the coupling system. If you drive a tractor-trailer, the examiner watches the fifth wheel, the air lines, and the trailer as closely as the truck itself.
Use this checklist to build one fixed routine. Say every check out loud. If you do not say it, it does not count.
The Inspection Order for Class A
- Approach the vehicle and look for leaks and damage.
- Under the hood, engine off: fluids, hoses, belts.
- In the cab: before and during engine start.
- The in-cab air brake check.
- Walkaround, counterclockwise: front, driver side, rear, passenger side.
- The coupling system and the trailer (Class A only).
- Back in the cab: final lights, mirrors, and summary.
The rest of this page follows that order item by item.
Before You Open the Hood
Approach from the front left. Name what you see:
- Vehicle level, not leaning to one side.
- Fresh puddles under the engine, transmission, or tanks.
- Obvious damage or bent panels.
- Chocks in place and the brake lines secure.
Under the Hood (Engine Off)
Point at each part as you describe it:
- Oil dipstick: level in the safe range.
- Coolant: at the proper level, no leaks.
- Power steering fluid: full, cap secure.
- Hoses: no cracks, bulges, or leaks.
- Belts: not frayed or worn, deflect no more than 3/4 inch.
- No fuel or oil leaks under the engine.
In the Cab, Before Starting
- Fire extinguisher: charged and secured.
- Three reflective triangles: present and in good shape.
- Spare fuses: available.
- Seat belt: fastened before the engine start.
- Mirrors and windshield: clean and adjusted.
In the Cab, During the Start
- Engine starts and runs smoothly.
- No abnormal gauges or warning lights.
- Oil pressure and voltmeter in the normal range.
- Windshield wipers work.
- Horn works.
- Heater, lights, and signal indicators work.
The Air Brake Check (Class A, In-Cab)
Run the four tests in order: build to 100-125 psi, applied leak test (max 3 psi single / 4 psi combination per minute), low air warning before 60 psi, pop-out valves between 20-40 psi. The full script is in our air brake check guide.
Walkaround: Front and Steer Axle
- No cracks in the frame or the steering linkage.
- Steering box mounted and secured.
- Shock absorbers and spring hangers: no cracks, no loose bolts.
- Lug nuts present and tight.
- Steer tires: minimum 4/32 inch tread, no cuts or bulges.
- Hub oil seal: no leaks.
Driver’s Side of the Tractor
- Fuel tank mounted, cap secure, no leaks.
- Battery box and cables secure.
- Drive tires: 2/32 inch minimum tread, no sidewall damage.
- Wheel rims: no cracks or unauthorized welds.
- Slack adjusters: properly mounted, no signs of looseness.
- Drive axle suspension: U-bolts and tie rods secured.
The Coupling System (Class A)
This is the section that separates Class A drivers from the rest.
- Air lines (Glad Hands): securely connected, rubber grommets sealed, no cracks or leaks.
- 7-way electrical cable: plugged in with the safety latch closed.
- Fifth wheel plate: properly greased, no gap under the trailer.
- Kingpin: not bent, cracked, or broken.
- Locking jaws: with a flashlight, confirm they are closed around the kingpin.
- Release arm: engaged with the safety latch in place.
- Trailer emergency brakes: apply when air is released.
The Trailer
- Clearance lights: working and clean on the front.
- Reflective strips: cover at least 50% of the trailer sides.
- Frame and crossmembers: no damaged or missing welds.
- Tandem release handle: locked, pins fully extended.
- Rear doors: hinges secured, seals intact.
- Rear lights, brake lights, and turn signals: working.
- Trailer tires: 2/32 inch tread, no bulges or cuts.
- Mud flaps: present and secure.
The 4 Items People Skip
Examiners see the same four failures every week, and none of them are obscure parts:
- Locking jaws. People point at the fifth wheel plate but never verify the jaws are closed around the kingpin. It is a visual check that needs a flashlight - say “jaws are closed around the kingpin” out loud.
- Trailer emergency brake application. With the air lines connected and charged, charge and then release the trailer emergency (spring) brakes and listen for them apply. Skipping it reads as not understanding the system.
- Tandem release pins. The handle being locked is not enough - confirm the pins are fully extended through the rails.
- Mud flaps. Missing or torn flaps are a real defect on the road and an easy deduction on the test.
Coupling questions like these also appear on the written side - the combination vehicles practice test covers the same fifth-wheel and air-line items you describe during the walkaround.
Back in the Cab, Final Checks
- Turn signals and four-way flashers work.
- Brake pedal feels firm.
- Brake lights activate when the pedal is pressed.
- Steering wheel has little free play.
- Sum up: “I have completed the pre-trip inspection.”
How the Class A Test Is Scored
The examiner scores the verbal description, not just the touching. Full points come from naming the part, the risk, and what could be wrong. The coupling section is worth a large share, so never rush it. If you forgot an item, say “I want to go back and check X” before the section ends.
The written side of inspection levels is covered in the general CDL pre-trip guide.
Frequently Asked Questions
How long does the Class A pre-trip take?
Plan for 30 to 45 minutes. The coupling and trailer sections add time over a Class B walkaround.
Can I bring a checklist?
Most states give you an approved list of part names, but it will not include the phrases you must say. Practice with this page until the routine is automatic.
What happens if I fail the coupling section?
In most states you cannot continue to the driving test. You retake the pre-trip before the road exam.
Are the PSI values the same during the coupling check?
Yes. The emergency brake check on the trailer uses the same 100-125, 60, 20-40 numbers as the tractor.
Practice for the Skills Test
Drill the air brake numbers and the general knowledge rules before test day. Review whether air brakes are required for your class.
Official Sources
Skills test and pre-trip requirements: 49 CFR 383.95. Class definitions and coupling rules: 49 CFR 383.91. Training standards: FMCSA Entry-Level Driver Training.
Exact scoring and item counts vary by state. Always confirm with your state’s CDL manual and training provider.
Ready to put this into practice?
Take a free CDL practice test — or let the AI tutor quiz you on any subject, in any language.